cups - Common Unix Printing System ChangeLog


# CUPS 1.4.3
# ==========
# Slackware 11.0: cups 1.1.23
# Slackware 12.0: cups 1.2.11
# Slackware 12.1: cups 1.3.7
# Slackware 12.2: cups 1.3.9
# Slackware 13.0: cups 1.3.11
# Slackware 13.1: cups 1.4.3

# Prerequisites:
# groff
# pkg-config
# D-Bus
# libjpeg 6b
# zlib
# libpng
# libtiff
# OpenSLP (optional)
# OpenLDAP (optional)
# OpenSSL or GnuTLS (optional; for SSL support)
# PAM (optional; if you have it but don't want to build it in,
#   add --disable-pam below)
# Java (for web interfaces)
# Perl (ditto)
# PHP (ditto)
# Python (ditto)

# If you have trouble downloading CUPS with the URL below, you can also
# get it here:

# If you're replacing another print server like lpr, lpr-ng, etc., remove it
# before you begin.  CUPS should blow it away, but better to do it on purpose
# beforehand, and I'm sure it won't clean out old man pages and such...
# Every time I removepkg'd lpr it left /usr/sbin/lpd, so 'rm /usr/sbin/lpd'
# too (don't forget to 'killall lpd' also).

# After you install CUPS itself, move on to these howtos (before you start
# CUPS and configure the printer):
# HPLIP (HP Linux Imaging and Printing)
# gimp-print (Canon, Epson, Lexmark,
#  and PCL drivers)
# Ghostscript

# This howto used to install several things into ~/installed/cups (because
# they were all in this howto).  Move them into ~/installed and fix the
# source dirs:
test -d installed/cups &&
( mv -f installed/cups/* installed/ ; rmdir installed/cups )
test -d src/cups &&
( mv -f src/cups/* src/ ; rmdir src/cups )

test -f installed/cups-1.4.3-source.tar.bz2 &&
mv installed/cups-1.4.3-source.tar.bz2 .
test ! -f cups-1.4.3-source.tar.bz2 &&

# Verify tarball w/ md5sum:
echo "e70b1c3f60143d7310c1d74c111a21ab  cups-1.4.3-source.tar.bz2" | \
md5sum -c

mkdir -p -m 0700 src
cd src
find -maxdepth 1 -type d -name "cups-*" -exec rm -r {} \;
tar xjvf ~/cups-1.4.3-source.tar.bz2
cd cups-1.4.3
test $UID = 0 && chown -R root:root .

# If you have both OpenSSL and GnuTLS installed, and configure can find
# both, it will use GnuTLS.
# If you are building in OpenSSL and have it installed under /usr/local/ssl
# or another location that is not in your PATH, tell configure where to find
# it like so:
# ./configure \
#  --with-openssl-libs=/usr/local/ssl/lib \
#  --with-openssl-includes=/usr/local/ssl/include

# To specify a Java interpreter for web interfaces, add --with-java=/path
# to configure below.  For example: --with-java=/usr/local/java/bin/java
# If it's in your PATH, configure should find it automatically without the
# --with-java option.


# Become root

# Back up existing CUPS config files:
test -d /etc/cups &&
( mkdir -p -m 0700 ~/backup/cups
   cp -a /etc/cups/* ~/backup/cups/ )

# If you have a modern version of Slackware that supports SystemV style
# init scripts, create the necessary directories:
test -x /etc/rc.d/rc.sysvinit &&
( cd /etc/rc.d ; mkdir -p init.d rc{0,1,2,3,4,5,6}.d )

test -x /sbin/removepkg && /sbin/removepkg cups
( cd /usr/lib ; rm -f libcups.* libcupsimage.* )
make install

# If you compiled in PAM support, 'make install' added a /etc/pam.d/cups
# file if you didn't have one already.  

# If you have both init scripts, leave the init.d one, remove the other
test -e /etc/rc.d/rc.cups && test -e /etc/rc.d/init.d/cups &&
rm -f /etc/rc.d/rc.cups

# If you don't want to run the cupsd server:
test -x /etc/rc.d/init.d/cups && chmod -x /etc/rc.d/init.d/cups

# To set up a CUPS client that will only print to one remote printer:
cd /etc/cups
mv -f client.conf client.conf.orig
echo "ServerName" > client.conf

# To set up a CUPS server, do everything below:

# Poke around in /etc/cups.  If you just upgraded CUPS, you'll find the file
# you had before, an .O file if you've upgraded before, and an .N file from
# the version you just upgraded to.  Check for differences between the file
# and the .N file.

## Add these two lines to /etc/services if they're not in there already:
# ipp 631/tcp
# ipp 631/udp

## For logging, either set these three lines in /etc/cups/cupsd.conf
# AccessLog syslog
# ErrorLog syslog
# PageLog syslog
## or set up log rotating for /var/log/cups/*:
cat << EOF > /etc/logrotate.d/cups
/var/log/cups/access_log /var/log/cups/error_log /var/log/cups/page_log {
  rotate 6
chmod 600 /etc/logrotate.d/cups

# Create and/or fix up your CUPS init script:
test -f /etc/rc.d/init.d/cups -a -f /etc/rc.d/rc.cups && rm /etc/rc.d/rc.cups
test ! -d /etc/rc.d/init.d &&
install -m 755 ~/src/cups-1.4.3/ /etc/rc.d/rc.cups

# If you have an older version of Slackware that doesn't run rc.cups out of
# /etc/rc.d/rc.M on boot-up (grep rc.M for "rc.cups" to find out), or if you
# don't run Slackware (or another distro that uses SystemV init scripts) at
# all, add something to rc.local (or your distro's equivalent) to run
# "rc.cups start" on boot-up:
# if [ -x /etc/rc.d/rc.cups ]; then
#   echo "Starting cupsd..."
#   /etc/rc.d/rc.cups
# fi

# Run this to start CUPS (cupsd):
test -x /etc/rc.d/init.d/cups && /etc/rc.d/init.d/cups start
test -x /etc/rc.d/rc.cups && /etc/rc.d/rc.cups start

## To use the CUPS web interface, open up http://localhost:631/ in a browser.
## By default, cupsd only listens to for connections.  If you
## need to be able to get to the web interface from remote machines, add
## something like this to cupsd.conf and restart CUPS.
# Listen
## ( is the machine's eth0 IP address).
## You'll also need to change lines like this:
# Allow @LOCAL
## to this:
# Allow localhost
# Allow
## If you don't want to use the web interface at all, see 'man lpadmin'.
## You can use it to add printers from the commandline.
## I used it to add a HP OfficeJet 7210 like this:
# lpadmin -p hp7210 -v socket:// -P \
# /usr/share/cups/model/foomatic-ppds/HP/HP-OfficeJet_7200-hpijs.ppd.gz -E

# (end of cups server part)

# Read the CUPS documentation:

# Become yourself again

mkdir -p -m 0700 installed
rm -f installed/cups-*.tar.*
mv cups-1.4.3-source.tar.bz2 installed/

# You may want to check out as well

# If you want to set up a fax printer in cups, check out my HylaFAX howto

# If you ever need to uninstall cups, this should do it:
# ('make uninstall' should do it, the rest is to make sure _everything_ is
# gone)
test -x /etc/rc.d/rc.cups && /etc/rc.d/rc.cups stop
test -x /etc/rc.d/init.d/cups && /etc/rc.d/init.d/cups stop
sleep 2
killall -9 cupsd > /dev/null 2>&1
test -d src/cups-* && ( cd src/cups-* ; make uninstall )
test -d /etc/cups && rm -r /etc/cups
( cd /usr/bin ; rm -f cancel cups-calibrate cups-config cupstestdsc \
cupstestppd lp lpq lpoptions lppasswd lpr lprm lpstat )
test -d /usr/doc/cups && rm -r /usr/doc/cups
test -d /usr/include/cups && rm -r /usr/include/cups
( cd /usr/lib ; rm -f libcups.* libcupsimage.* )
test -d /usr/lib/cups && rm -r /usr/lib/cups
( cd /usr/sbin ; rm -f accept cupsaddsmb cupsdisable cupsenable cupsd \
lpadmin lpc lpinfo lpmove reject )
test -d /usr/share/cups && rm -r /usr/share/cups
test -d /usr/share/doc/cups && rm -r /usr/share/doc/cups
find /usr/share/icons -type f -name cups.png -exec rm {} \;
find /usr/share/locale -type f -name "cups_*" -exec rm {} \;
( cd /usr/share/man/man1 ; rm -f cancel.1.gz cups-config.1.gz \
cupstestdsc.1.gz cupstestppd.1.gz lp.1.gz lpoptions.1.gz lp \
passwd.1.gz lpq.1.gz lprm.1.gz lpr.1.gz lpstat.1.gz )
( cd /usr/share/man/man5 ; rm -f classes.conf.5.gz client.conf.5.gz \
cups-snmp.conf.5.gz cupsd.conf.5.gz mime.convs.5.gz mime.types.5.gz \
printers.conf.5.gz subscriptions.conf.5.gz )
( cd /usr/share/man/man7 ; rm -f backend.7.gz filter.7.gz )
( cd /usr/share/man/man8 ; rm -f accept.8.gz cupsaddsmb.8.gz \
cups-deviced.8.gz cups-driverd.8.gz cups-lpd.8.gz cups-polld.8.gz \
cupsd.8.gz cupsenable.8.gz lpadmin.8.gz lpinfo.8.gz lpmove.8.gz lpc.8.gz )
test -d /var/cache/cups && rm -r /var/cache/cups
test -d /var/log/cups && rm -r /var/log/cups
test -d /var/run/cups && rm -r /var/run/cups
test -d /var/spool/cups && rm -r /var/spool/cups
test -f /etc/rc.d/rc.cups && rm -r /etc/rc.d/rc.cups
test -d /etc/rc.d/init.d &&
rm -r /etc/rc.d/init.d/cups /etc/rc.d/rc?.d/???cups
rm -f /etc/dbus-1/system.d/cups.conf \
test -x /usr/local/bin/php-config &&
rm -f "`/usr/local/bin/php-config --extension-dir`/"
find /usr/man/??/???? -type f -name "cups*" -exec rm {} \;
find /usr/man/man? -type f -name "cups*" -exec rm {} \;
find /var/man/cat? -type f -name "cups*" -exec rm {} \;
find ~/src -maxdepth 1 -type d -name "cups-*" -exec rm -r {} \;
rm -f ~/installed/cups-*.tar.*

List of HOWTOs

Web page itself last updated: 2023-12-20 8:06pm (EDT -0400)
HOWTO last updated: 2010-05-30 9:20pm
Copyright © 2001-2024 Jason Englander. All Rights reserved.